Floor/Panel Door Replacement

FLOOR - PANEL DOOR

REMOVAL

1. Remove the distribution duct from the vehicle.

2. Remove the floor-panel door actuator from the upper half of the distribution duct.

3. Disassemble the distribution duct.

Floor-Panel Door Lever:

4. Using a trim stick or another suitable wide flat-bladed tool, gently pry the lever off of the floor- panel door pivot shaft from the outside of the upper half of the distribution duct.

Floor-Panel Door Remove/Install:

5. Remove the floor-panel door from the upper half of the distribution duct.

INSTALLATION

1. Reverse the removal procedures to install.