Seat Belt Retractor Cover - Bezel Comes Loose: Overview

NUMBER: 23-18-99

GROUP: Body

DATE: May 21, 1999

SUBJECT:
Bezel Came Loose From Seat Belt Retractor Cover

OVERVIEW:
This bulletin involves installing a new seat belt retractor cover.

MODELS:

1998 - 1999 (BR/BE) Ram Truck

NOTE:
THIS BULLETIN APPLIES TO CLUB/QUAD CAB VEHICLES.

SYMPTOM/CONDITION:
The seat belt retractor cover bezel comes loose due to a cracked seat belt retractor cover.

The crack may occur at the bottom of the opening where the seat belt bezel snaps into the cover.

DIAGNOSIS:
Inspect the seat belt retractor cover for cracks or other damage. If the seat belt cover is cracked or damage, perform the Repair Procedure

PARTS REQUIRED:

AR (1) 05015932AA Cover, Seat Belt Retractor, Right Side
AR (1) 05015933AA Cover, Seat Belt Retractor, Left Side

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Labor Operation No:
23-13-02-92 Replace Seat Belt Retractor
Cover - One - Right Or Left Side 0.8 Hrs.

FAILURE CODE: P8 - New Part