Transmission Lubricant Level and Capacity

Required lubricant for the NV5600 is MOPAR Manual Transmission Lubricant, PIN 4761526. This is the only lubricant recommended for use.

Fig. 3:

The transmission lubricant is drained through either of the PTO covers bottom bolt hole. It will be necessary to apply sealer to the bolt threads before installing it during a lubricant change.
Dry fill lubricant capacity is approximately 4.5 liters (9.5 pints).

Fig. 4:

Correct lubricant fill level is to the bottom edge of the fill plug hole. Check fill level only when the transmission is level.