Seat Belt CTM Message Mismatch (Active) - Quad Cab

SYMPTOM
SEAT BELT CONTROL TIMER MODULE MESSAGE MISMATCH (ACTIVE)

WHEN MONITORED
Continuously after the ignition is ON.

SET CONDITION
If the seat belt lamp request (ON or OFF) from the ACM does not match the cluster seat belt lamp state (ON or OFF) for 2 continuous seconds the code will be set.

POSSIBLE CAUSES
- Active code present only with PAB ON/OFF SW OFF
- ACM defective, seat belt lamp ON
- ACM defective, seat belt lamp OFF
- ACM seat belt lamp state
- ACM seat belt lamp status
- MIC seat belt lamp state
- MIC seat belt lamp status