Hard Wired Lamps

The cluster contains several hard wired lamps described earlier. These lamps are set up in two configurations. Either the cluster supplies power and ground is supplied by the circuit being monitored or the lamp is supplied ground by the cluster and power comes from a module or other device. Refer to the schematic for the specific details on the lamp in question. Verification of the bulb filament may be required in cases of an inoperative lamp. This will require removal of the cluster and the bulb in question.

NOTE: ALL RED WARNING LAMPS EXCEPT THE WAIT TO START LAMP ARE LIGHT EMITTING DIODES (LED). LED'S ARE NOT REPLACEABLE, IF DEFECTIVE THE INSTRUMENT CLUSTER MUST BE REPLACED.