Loss of Ignition Run/Start (Active)

SYMPTOM
LOSS OF IGNITION RUN/START (ACTIVE)

WHEN MONITORED
Continuously with the ignition ON.

SET CONDITION
With the ignition ON, the ignition run/start circuit voltage is other than expected.

POSSIBLE CAUSES
- Active code present only with PAB ON/OFF SW OFF
- Ignition switch output RUN/START open
- Fuse # 19 Defective
- Fused ignition switch output RUN/START open
- Fused ignition switch output RUN/START short to ground
- ACM Defective, fused ignition RUN/START open
- ACM Defective, fuse # 19 Defective
- ACM Defective, fused ignition RUN/START shorted