Passenger Airbag Module (PAB)

The airbag door in the instrument panel top cover above the glove box is the most visible part of the passenger side airbag system. Located under the airbag door is the airbag cushion and it's supporting components. The airbag module includes a housing to which the cushion and inflator are attached and sealed. The airbag module includes a housing to which the cushion and inflator are attached and sealed. The airbag module cannot be repaired, and must be replaced if deployed or in any way damaged. The inflator assembly is mounted to the back of the airbag module. The inflator includes a small canister of highly compressed argon gas. The inflator seals the hole in the airbag cushion so it can discharge the compressed gas it contains directly into the cushion when supplied with the proper electrical signal. The airbag door has a living hinge at the top, which is secured to the instrument panel top cover. The door also has predetermined breakout lines concealed beneath its decorative cover. Upon airbag deployment, the airbag door will split at the breakout lines and the door will pivot out of the way.

The airbag module is secured at the bottom to the steel structural base of the instrument panel above the glove box opening. The airbag door is serviced as a unit with the passenger side airbag module, and includes the two passenger heating and air conditioning panel outlet housings. Following an airbag deployment, the airbag module and the instrument panel assembly must be replaced.