Removal and Installation

NOTE: Oil pan must be removed prior to removing oil pump.

REMOVAL
1. Remove accessory drive belts.
2. Remove crankshaft damper and timing belt.
3. Remove crankshaft sprocket and key.





Fig. 98

4. Remove 5 bolts that attach oil pump to block (Fig. 98).
5. Remove oil pump and gasket.

INSTALLATION
1. Clean block and pump surfaces.





Fig. 99

2. Install new gasket (Fig. 99) make sure correct length bolts are used (Fig. 98).
3. Torque bolts to
4. Install crankshaft key and sprocket.
5. Install timing belt.
6. Install crankshaft damper.
7. Install accessory drive belts.