Fluid Requirement

NOTE: Refer to the Service Intervals for the recommended maintenance (fluid/filter change) intervals for this transaxle.

NOTE: Refer to Service Procedures for fluid level checking procedures.

NOTE: The transmission and differential sump have a common oil sump with an opening between the two.

DESCRIPTION
Mopar(R) ATF+4 (Automatic Transmission Fluid Type 7176) is required in this transaxle. Substitute fluids can induce torque converter clutch shudder.

Mopar(R) ATF+4 (Automatic Transmission Fluid Type 7176) when new is red in color. The ATF is dyed red so it can be identified from other fluids used in the vehicle such as engine oil or antifreeze. The red color is not permanent and is not an indicator of fluid condition. As the vehicle is driven, the ATF will begin to look darker in color and may eventually become brown. This is normal. A dark brown/black fluid accompanied with a burnt odor and/or deterioration in shift quality may indicate fluid deterioration or transmission component failure.

FLUID ADDITIVES
Daimler Chrysler strongly recommends against the addition. of any fluids to the transmission, other than those automatic transmission fluids listed above. Exceptions to this policy are the use of special dyes to aid in detecting fluid leaks.

Various "special" additives and supplements exist that claim to improve shift feel and/or quality. These additives and others also claim to improve converter clutch operation and inhibit overheating, oxidation, varnish, and sludge. These claims have not been supported to the satisfaction of Daimler Chrysler and these additives must not be used. The use of transmission "sealers" should also be avoided, since they may adversely affect the integrity of transmission seals.