2ND Row Seat Back Cover

2ND ROW SEAT BACK COVER

REMOVAL

NOTE: Cloth trim is bonded to seat foam.

1. Tumble seat forward.
2. Disengage J-strap at seat back base.
3. Disengage inboard and outboard J-straps on seat back.
4. Return seat to seating position.

NOTE: When removing the head restraint sleeves and guides, the retaining tabs on the sleeves and guides will be damaged. Check the availability of replacement parts before servicing.

5. Remove head restraint, head restraint sleeves, and head restraint guides. Discard sleeves and guides.
6. Roll cover upward and remove from seat back.

INSTALLATION

1. Position cover on seat back.
2. Roll cover downward over seat back.
3. Install new head restraint sleeves and guides. Install head restraint.
4. Tumble seat forward.
5. Engage inboard and outboard J-straps on seat back.
6. Engage J-strap at seat back base.
7. Return seat to seating position.