Idle Speed/Throttle Actuator - Electronic: Service and Repair

The IAC motor is located on the throttle body.

REMOVAL
1. Remove air duct and air resonator box at throttle body.

Fig. 20 - Throttle Body, Sensor And Electrical Connectors:

2. Disconnect electrical connector from IAC motor.

Fig. 21 - TPS Mounting Bolts:

3. Remove two mounting bolts (screws).
4. Remove IAC motor from throttle body.

INSTALLATION
1. Install IAC motor to throttle body.
2. Install and tighten two mounting bolts (screws) to 7 Nm (60 in. lbs.) torque.
3. Install electrical connector.
4. Install air duct/air box to throttle body.