Front Blower Motor

REMOVAL
1. Remove glove box. Refer to Instrument Panel and Systems.

Blower Motor Cover:

2. Remove (4) hex head screws to blower motor cover.
3. Disconnect blower motor wiring.

Wiring Grommet - Typical:

Feeding Wiring Through Housing - Typical:

4. Remove grommet for wiring. Feed wiring through blower housing.

Blower Motor Mounting Tabs:

5. Remove mounting screws for blower motor.
6. Allow the blower assembly to drop down, and remove assembly from vehicle.

INSTALLATION
- For installation, reverse the above procedures.