Bucket Seat Riser

SEAT RISER - BUCKET

REMOVAL

1. Remove seat from vehicle.

Fig. 6:

Fig. 7:

2. Remove nuts attaching bucket seat to riser (Fig. 6) and (Fig. 7).
3. Disconnect power seat harness connector, if equipped.
4. Separate riser from seat.

INSTALLATION

1. Position riser on seat
2. Install nuts attaching riser to seat cushion frame. Tighten nuts to 75 N.m (55 ft. lbs.) torque.
3. Connect power seat harness connector, if equipped.
4. Install the seat.