No Response From PCM With A No Start Condition

Test 1:

Tests 2 - 6:

Tests 7 - 11:

Tests 12 - 17:

Tests 18 - 22:

Tests 23 - 25:

SYMPTOM
NO RESPONSE FROM PCM WITH A NO START CONDITION

POSSIBLE CAUSES
- Fused ignition switch output circuit open
- PCM ground circuit(s) open
- "NO RESPONSE" displayed from DRB
- ASD relay output circuit shorted to ground
- Camshaft Position Sensor
- Crankshaft Position Sensor
- Fuel injector(s)
- Generator shorted to ground
- Ignition coil
- Leak Detection Pump
- MAP sensor
- O2 sensor(s)
- TPS (5 volt supply)
- TPS ground circuit shorted to voltage
- Transmission solenoid
- PCM 5 volt primary supply circuit shorted to ground
- PCM 5 volt secondary supply circuit shorted to ground
- Fused B(+) circuit open between fuse/battery
- Fused B(+) circuit open between fuse/PCM
- Fused B(+) circuit shorted to ground
- Powertrain Control Module (5 volt)