P0210

Tests 1 - 2:

Tests 3 - 7:

Tests 8 - 9:

SYMPTOM
P0210 - INJECTOR # 10 CONTROL CIRCUIT

WHEN MONITORED
With battery voltage greater than 10.4 volts, the auto shutdown relay energized, injector pulse width less than 10 ms, and engine speed less than 3000 rpm.

SET CONDITION
This trouble code takes 0.64 to 10.0 seconds to set when no inductive kick is sensed 18 ms after injector turns OFF, and with no other injectors ON.

POSSIBLE CAUSES
- Intermittent problem with injector wiring/connector
- Auto shutdown relay output circuit open
- Injector # 10
- Injector # 10 driver circuit open
- Injector # 10 driver circuit shorted to ground
- Powertrain Control Module (injector driver)