Seat Temperature Control Module: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the front seat center cushion and back from the driver side and passenger side seat adjuster brackets. Refer to front seat center cushion and back removal procedures.

Heated Seat Module Remove/Install:

3. Disconnect the seat wire harness connector from the connector receptacle on the back of the heated seat module.
4. Remove the two push-on retainers that secure the mounting tabs of the heated seat module to the top of the mounting bracket.
5. Remove the heated seat module from the bottom of the mounting bracket.

INSTALLATION
1. Position the heated seat module mounting tabs through both holes from the bottom of the mounting bracket.
2. Install the two push-on retainers onto the heated seat module mounting tabs to secure the module to the top of the mounting bracket.
3. Reconnect the seat wire harness connector to the connector receptacle on the back of the heated seat module.
4. Install the front seat center cushion and back onto the driver side and passenger side seat adjuster brackets. Refer to Center Seat/Console for seat center cushion and back installation procedures.
5. Reconnect the battery negative cable.