Turn Signal Lamp: Description and Operation

STOP/TURN/TAIL LAMPS
The rear tail lamp modules are mounted on the rear of the vehicle, outboard of the rear door or doors, and molded into the lines of the vehicle. Each module contains three bulbs, a lens, and a housing. One bulb is a two filament bulb used for tail, stop, and turn signal functions, The other bulbs are single filament bulbs used for back-up light illumination and side marker light.

Each tail lamp module can be serviced separately. Each bulb can also be serviced separately. The headlamp switch controls tail lamp/side marker operation. The multifunction switch controls turn signal operation, and the back-up light switch controls the back-up light operation. The brake lamp switch controls the stop lamp function.

FRONT TURN/PARK LAMPS
The front turn signal/parking lamp/side marker is incorporated into a single module. The dual filament bulb is serviceable separately.

The parking light function is controlled by the headlamp switch located on the instrument panel. The turn signal function is controlled by the multi- function switch located on the steering column. Each front turn signal/parking lamp module can be serviced separately.