Fuel Pump Relay: Description and Operation
FUEL PUMP RELAY - PCM OUTPUT8w-13-2:
The 5-pin, 12-volt, fuel pump relay is located in the Fuse and Relay Block at the left end of the instrument panel.
The Powertrain Control Module (PCM) energizes the electric fuel pump through the fuel pump relay. The fuel pump relay is energized by first applying battery voltage to it when the ignition key is turned ON, and then applying a ground signal to the relay from the PCM.
Whenever the ignition key is turned ON, the electric fuel pump will operate. But, the PCM will shutdown the ground circuit to the fuel pump relay in approximately 1 - 3 seconds unless the engine is operating or the starter motor is engaged.