Power Mirror Switch: Service and Repair

REMOVAL AND INSTALLATION
1. Disconnect and isolate the battery negative cable.

Power Mirror Switch Control Knob Remove/Install - Typical:

2. Pull the power mirror switch control knob rearward to remove it from the switch stem.

Power Mirror Switch Nut - Typical:

3. Remove the nut that secures the power mirror switch to the driver side door trim panel.
4. Remove the mirror flag bezel from the inside of the front door.

Power Mirror Switch Remove/Install:

5. Unplug the power mirror switch wire harness connector.
6. Remove the power mirror switch from the back of the door mirror flag bezel.
7. Reverse the removal procedures to install.