Incomplete Latch Cinch - Overcurrent

Tests 1 - 2:

Tests 3 - 7:

SYMPTOM
INCOMPLETE LATCH CINCH - OVERCURRENT

WHEN MONITORED
Whenever the power sliding door is operating in the closing direction.

SET CONDITION
The latch motor stall current of 6.2 amps has been detected, or a time-out has occurred with no pawl or ratchet failure. This code is set during the power cinching operation.

POSSIBLE CAUSES
- DTC present
- Binding door
- Cinch/release motor latch driver wire open
- Cinch/release motor unlatch driver wire open
- Cinch/release motor latch driver wire short to ground
- Cinch/release motor unlatch driver wire short to ground
- Latch assembly