Incomplete Power Close - Overcurrent

Tests 1 - 2:

Tests 3 - 7:

SYMPTOM
INCOMPLETE POWER CLOSE - OVERCURRENT

WHEN MONITORED
Anytime the Power Sliding Door is operating in the closing direction.

SET CONDITION
The drive motor stall current of over 16 amps has been detected for over 500 ms. during a close operation.

POSSIBLE CAUSES
- DTC present
- Power sliding door motor/clutch
- Binding door
- Ground circuit open
- Cinch/release motor unlatch driver circuit short to ground
- Door motor clutch driver circuit short to ground
- Sliding door close driver circuit short to ground