Headlamp Unit Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.

Fig.11 Headlamp Fasteners:

2. Remove the three retaining screws.

Fig.12 Headlamp Assembly:

3. Disconnect the wiring harness from the bulbs.
4. Remove wire harness retainer from back of headlamp unit.
5. Remove the headlamp unit.

INSTALLATION
1. Reconnect wire harness to the bulbs.
2. Install wire harness retainer to headlamp unit.
3. Install the three retaining screws.
4. Reconnect the battery negative cable.