Removal and Installation

REMOVAL
(1) Remove wheel and tire assembly.
(2) Remove brake drum.
(3) Disconnect wheel cylinder brake line.
(4) Remove brake shoe return springs and move shoes out of engagement with cylinder push rods.
(5) Remove cylinder attaching bolts and remove cylinder from support plate.

INSTALLATION
(1) Apply bead of silicone sealer around cylinder mounting surface of support plate.
(2) Install cylinder mounting bolts and tighten to 20 Nm (15 ft. lbs.).
(3) Connect brake line to cylinder.
(4) Install brake shoe return spring.
(5) Install brake drum.
(6) Install wheel and tire assembly.
(7) Bleed base brake system.