Wiper and Washer Systems: Locations

The Central Timer Module (CTM) is located on the left cowl side inner panel under the driver side outboard end of the instrument panel.

The washer fluid level switch is located in a dedicated hole near the front of the windshield washer reservoir on the right outboard end of the upper radiator shroud.

The wiper relay is located in the Power Distribution Center (PDC) in the engine compartment near the battery.

The check valve is integral to the washer nozzle plumbing eye fitting located in the cowl plenum beneath the cowl plenum coven grille panel near the base of the windshield.

The washer pump/motor unit is located on the outboard side of the washer reservoir; near the bottom in the right front corner of the engine compartment.

The molded plastic washer fluid reservoir is integral to, and located on the right end of the upper radiator shroud in the right front corner of the engine compartment

The wiper arms are the rigid members located between the wiper pivots that protrude from the cowl plenum cover/grille panel near the base of the windshield and the wiper blades on the windshield glass.

The wiper relay (or intermittent wipe relay) is located in the Power Distribution Center (PDC) near the battery in the engine compartment.