Headlamp Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove headlamp assembly. (Refer to HEADLAMP UNIT REMOVAL).
3. Remove the retaining ring holding bulb to headlamp.

Fig. 10 Headlamp Bulb:

4. Pull bulb socket from headlamp.
5. Grasp bulb and pull from socket.

INSTALLATION

CAUTION: Do not touch the bulb glass with lingers or other oily surfaces. Reduced bulb life will result.

1. Position bulb into socket and push into place.
2. Position bulb socket in headlamp.
3. Install retaining ring holding bulb to headlamp.
4. Install headlamp assembly.
5. Connect the battery negative cable.