Air Temperature Sensor ( Ambient / Intake ): Service and Repair

Fig. 23 Intake Manifold Air Temperature Sensor - Typical:

REMOVAL
The intake manifold air temperature sensor is located in the front/side of the intake manifold.
1. Remove air duct at throttle body.
2. Disconnect electrical connector at sensor.
3. Remove sensor from intake manifold.

INSTALLATION
The intake manifold air temperature sensor is located in the front/side of the intake manifold.
1. Install sensor to intake manifold. Tighten to 28 Nm (20 ft. lbs.) torque.
2. Install electrical connector.
3. Install air duct at throttle body.