Tail Lamp Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the tail lamp unit. (Refer to LAMPS/LIGHTING - EXTERIOR/TAIL LAMP UNIT - REMOVAL).

Fig.18 Tail Lamp Socket:

3. Squeeze the tabs on the bulb socket and remove from tail lamp unit.
4. Pull bulb from lamp socket.

INSTALLATION
1. Push bulb into the lamp socket.
2. Install bulb socket into the tail lamp unit. Ensure that both retaining tabs engage with an audible click.
3. Install the tail lamp unit. (Refer to LAMPS/LIGHTING - EXTERIOR/TAIL LAMP UNIT - INSTALLATION).
4. Reconnect the battery negative cable.