Bench Seat Track Flat Floor

BENCH SEAT TRACK FLAT FLOOR

REMOVAL

1. Remove second row seat from vehicle.
2. Place seat on clean covered work surface.
3. Disengage seat track adjuster link wire from track being removed.

Fig. 95:

4. Remove nuts attaching track to seat riser (Fig. 95).
5. Remove track from seat riser.

INSTALLATION
1. Place track in position on seat riser.
2. Install nuts attaching track to seat riser. (Fig. 95). Tighten nuts to 48 N.m (35 ft.lbs.) torque.
3. Engage seat track adjuster link wire onto track being installed.
4. Install second row seat into vehicle.