Headlamp Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.

Headlamp Assembly Removal:

2. Press in and pull up on the headlamp release lever to remove the headlight module.

Fig. 7 Headlamp Housing And Bulb Removal:

3. Pull the headlamp assembly out of headlamp mounting adaptor.
4. Disconnect wire connector from bulb.
5. Turn the bulb locking ring 1/4 turn counter-clockwise and pull back on the ring to release it.
6. Pull the halogen bulb out of the headlamp housing and remove the retaining ring.

INSTALLATION

CAUTION: Do not touch the bulb glass. Oil from the technicians hands or other sources, such as oily shop towels, will reduce the operating time of the bulb.

1. Install lock ring over the new Halogen bulb.
2. Connect wire connector.

Fig. 8 Headlamp Bulb Installation:

3. Insert the bulb into the headlamp housing.
4. Turn lock ring 1/4 turn clockwise to secure bulb.
5. Install headlamp.
6. Connect the battery negative cable.