Windshield Washer Hose: Service and Repair

REMOVAL
1. Unlatch, open, and support the hood panel.
2. From the underside of the hood panel, disconnect the washer from the barbed washer nozzle fitting.

Fig. 9 Washer Nozzles:

3. From the underside of the hood panel, compress the snap features of the washer nozzle and push the nozzle out through the top of the panel.

INSTALLATION
1. Align the washer nozzle with the opening of the mounting hole on the top of hood panel.
2. Using hand pressure, push the washer nozzle into the opening from the top of the hood panel until the snap features of the nozzle are fully engaged.
3. From the underside of the hood panel, reconnect the washer hose to the barbed nozzle fitting.
4. Close and latch the hood panel.