B-Pillar Upper Trim

B-PILLAR UPPER TRIM

REMOVAL

1. Remove the seat belt turning loop.

Fig. 6:

2. Open the trim plugs and remove the grab handle bolts, if equipped. (Fig. 6)

Fig. 7:

Fig. 8:

3. Using a trim stick C-4755 or equivalent, remove the upper b-pillar trim. (Fig. 7) or (Fig. 8)

INSTALLATION

1. Position the upper b-pillar trim and seat the attachment clips fully.
2. Install the grab handle bolts and tighten to 6 N.m (55 in.lbs).
3. Close the grab handle trim plugs.
4. Install the seat belt turning loop.