C-Pillar Lower Trim
C-PILLAR LOWER TRIMREMOVAL
1. Remove the upper c-pillar trim. Refer to Trim Panel.
Fig. 11:
2. Remove the seat belt anchor bolt. (Fig. 11)
3. Using a trim stick C-4755 or equivalent, remove the lower c-pillar trim.
4. Pull seat belt out of the trim panel through the slot provided.
INSTALLATION
1. Route the shoulder belt through the slot in the trim.
2. Position the trim and seat the attachment clips fully.
3. Install the seat belt anchor bolt and tighten to 40 N.m (30 ft.lbs).
4. Install the upper c-pillar trim.