Fuel Pump Relay: Service and Repair

Fig.47 High-Pressure Fuel Shut-Off Solenoid Relay Location:

REMOVAL
The high-pressure fuel shut-off solenoid relay is located in the Fuse and Relay Block at the left end of the instrument panel (Fig. 47).
1. Remove cover at left end of instrument panel.
2. Remove relay from Fuse and Relay Block.
3. Check condition of relay terminals and Fuse and Relay Block connector terminals for damage or corrosion. Repair if necessary before installing relay.
4. Check for pin height (pin height should be the same for all terminals within the Fuse and Relay Block connector). Repair if necessary before installing relay.

INSTALLATION
1. Install relay to Fuse and Relay Block.
2. Install cover to instrument panel.