Recirc Overcurrent (Stored)

Test 1:

SYMPTOM
RECIRC OVERCURRENT (STORED) - MTC

TEST NOTE
This symptom is diagnosed using the test A/C FAULT (STORED) - MTC.

WHEN MONITORED
When actuator movement is requested.

SET CONDITION
All (Blend, Mode, Recirc, and Zone) Overcurrent DTC's may set if the A/C-Heater Control Module detects an excessive current draw on the door driver circuit(s).

POSSIBLE CAUSES
- Check for active HVAC DTC's and system tests fault messages
- Stored code(s) test complete