Headlamp Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable
2. Remove the headlamp assembly. (Refer to HEADLAMP UNIT - REMOVAL).
3. Remove the retaining ring holding the bulb to the headlamp.

Fig.10 Headlamp Bulb:

4. Pull the bulb socket from the headlamp.
5. Remove the bulb from the socket.

INSTALLATION

CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.

1. Position the bulb into the socket and push into place.
2. Position the bulb socket in the headlamp.
3. Install the retaining ring holding the bulb to the headlamp.
4. Install the headlamp assembly
5. Connect the battery negative cable.