2nd Seat Dome/Reading Lamp Replacement

REMOVAL

Fig.4 Lamp Lens:

1. Using a small flat blade, pry the center rearward edge of the dome/reading lamp lens downward from lamp.
2. Allow the lens to hang down this will disengage the forward edge of the lamp from the headliner.
3. Pull the forward edge of the lamp down and slide the lamp forward.
4. Separate the lamp from the headliner.
5. Disengage lamp wire connector from body wire harness.

Fig.5 Dome/Reading Lamp:

6. Separate lamp from vehicle.

INSTALLATION
1. Position lamp at headliner.
2. Connect lamp wire connector to body wire harness.
3. Position the rearward edge of the lamp in the headliner opening and slide lamp rearward.
4. Push the forward edge of the lamp in the headliner opening and push the lamp lens up into the lamp to secure.