Trunk / Liftgate: Adjustments
ADJUSTMENTSThe position of the liftgate can be adjusted upward or downward, and inward or outward by the use of hinge shims. The liftgate slam bumpers must also be adjusted if liftgate hinges are adjusted. The inward/outward position of each slam bumper is adjusted by the use of shims
1. To move the position of the liftgate inward or outward, remove or add shims between the hinge-halves and liftgate.
2. To move the position of the liftgate upward or downward, remove or add shims between the hinge-halves and roof panel.
3. To move the position of liftgate slam bumpers inward or outward, remove or add shims between the slam bumper screws and anchors.