Front

REMOVAL
1. Raise and support the vehicle.





2. Remove the upper link nut, retainer and grommet from each link.
3. Remove the stabilizer bar retainer bolts and remove the retainers and stabilizer bar from the vehicle.
4. Remove the bushings from the stabilizer bar.

INSTALLATION
1. Install the bushings on the stabilizer bar.
2. Install the stabilizer bar on the frame and install the retainers and the bolts.
3. Tighten the bolts to 60 Nm (45 ft. lbs.).

NOTE: Ensure the bar is center with equal spacing on both sides.

4. Install the upper link grommet, retainer and nut and tighten to 37 Nm (27 ft. lbs.).
5. Remove support and lower vehicle.