Backup Lamp: Service and Repair

REMOVAL
1. Remove and isolate the negative battery cable.
2. Remove the taillamp unit (Refer to LAMPS/LIGHTING - EXTERIOR/TAIL LAMP UNIT - REMOVAL).
3. Remove the bulb back plate from the tail lamp unit.
4. Separate the bulb from the socket.

INSTALLATION
1. Install the bulb into the socket.
2. Install the bulb back plate to the tail lamp unit.
3. Install the tail lamp unit (Refer to LAMPS/LIGHTING - EXTERIOR/TAIL LAMP UNIT - INSTALLATION)
4. Reconnect the negative battery cable.