Parking Lamp: Service and Repair

PARK/TURN SIGNAL LAMP

REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the headlamp unit (Refer to LAMPS/LIGHTING - EXTERIOR/HEAD- LAMP UNIT -REMOVAL).
3. Seperate the socket from the headlamp unit.

Pull Bulb From Socket:

4. Release the bulb socket locking tabs and seperate the bulb from the socket.

INSTALLATION
1. Install the bulb into the socket.
2. Install the socket into the headlamp unit.
3. Install the headlamp unit (Refer to LAMPS/LIGHTING - EXTERIOR/HEADLAMP UNIT - INSTALLATION).
4. Connect the negative battery cable.