Computers and Control Systems: Technical Service Bulletins

• Engine Control - PCM Initialization Procedure
• Engine Controls - Flash Programming Failure Recovery
  • Overview
  • Connected/Disconnected Flash Mode Using TechCONNECT
  • Pay Attention While Performing Flash Reprogram Procedures
  • Error Messages
  • Enhanced and Original Abort Recovery
  • Enhanced Abort Recovery Screens
  • Original Abort Recovery Screen
  • Programmable Modules
  • Powertrain Modules - Engine and Transmission
• Engine Controls - Co-Pilot Support/Correct Cable Usage
• Generic Scan Tool - Reference Information
  • Overview
  • Quick Reference
  • 1. Powertrain Diagnostic Data
  • 2. Powertrain Freeze Frame
  • 3. Emission Related DTCs
  • 4. Clear/Reset DTCs
  • 5. O2 Monitoring Results
  • 6. Last Monitor Results
  • 7. 1 Trip Failures
  • 8. On Board System Test
  • 9. Vehicle Information
  • Appendix A, B, C and D Information
• Safety Systems - Inadvertent Damage/Disabling