Front Mount

REMOVAL
1. Disconnect the battery negative cable.
2. Position fan to ensure clearance for radiator top tank and hose.

CAUTION: DO NOT lift the engine by the intake manifold.

3. Install engine support/lifting fixture.
4. Raise vehicle on hoist.





5. Lift the engine SLIGHTLY and remove the thru-bolt and nut (Fig. 45) .
6. Remove engine support bracket/cushion bolts (Fig. 45) . Remove the support bracket/cushion and heat shields.

INSTALLATION
1. With engine raised SLIGHTLY, position the engine support bracket/cushion and heat shields to the block. Install new bolts and tighten to 81 Nm (60 ft. lbs.) torque.
2. Install the through-bolt into the engine support bracket/cushion.





3. Lower engine with support/lifting fixture while guiding the engine bracket/cushion and through-bolt into support cushion brackets (Fig. 46) .
4. Install through-bolt nuts and tighten the nuts to 102 Nm (75 ft. lbs.) torque.
5. Lower the vehicle.
6. Remove lifting fixture.