Fuel Pump Relay: Service and Repair

Fig.17 Fuel Pump Relay Location:

FUEL PUMP RELAY
The fuel pump relay is located in the Fuse and Relay Block at the left end of the instrument panel (Fig. 17). Refer to the inside of cover (end cap) for relay location.

REMOVAL
1. Remove cover at left end of instrument panel.
2. Remove relay from Fuse and Relay Block.
3. Check condition of relay terminals and Fuse and Relay Block connector terminals for damage or corrosion. Repair if necessary before installing relay
4. Check for pin height (pin height should be the same for all terminals within the Fuse and Relay Block connector). Repair if necessary before installing relay.

INSTALLATION
1. Install relay to Fuse and Relay Block.
2. Install cover to instrument panel.