Liftgate Cylinder Lock Switch Input Open/STV (Export)

Test 1 - 2:

Test 3 - 5:

SYMPTOM
LIFTGATE CYLINDER LOCK SWITCH INPUT OPEN OR SHORT TO VOLTAGE - (EXPORT ONLY)

WHEN MONITORED
At all times when battery power is supplied to the Body Control Module.

SET CONDITION
When the BCM senses voltage to the cylinder lock switch above 4.6 volts for over 10 seconds.

POSSIBLE CAUSES
- DTC present
- Body control module - liftgate cylinder switch voltage low
- Liftgate cylinder switch ground open
- Liftgate cylinder switch mux open
- Liftgate cylinder switch open
- Cylinder lock switch mux short to voltage
- Body control module - liftgate cylinder lock switch mux short to voltage