Sunroof Assembly

SUNROOF ASSEMBLY

REMOVAL
1. Move glass panel to the fully closed position.
2. Disconnect battery negative cable.
3. Remove headliner.

Fig.1 Sunroof Assembly:

4. Disconnect the four drain tubes from sunroof housing.
5. Loosen fasteners attaching sunroof assembly.
6. With the aid of a helper, support the sunroof and remove the fasteners attaching sunroof assembly to roof panel.
7. Remove sunroof from vehicle.

INSTALLATION
1. Raise sunroof module assembly and guide it carefully into position.
2. While supporting the sunroof assembly tighten the attaching screws. Tighten to 6 N.m (53 in. lbs.) torque.
3. Connect the drain tubes to the sunroof.
4. Connect battery negative cable.
5. Test sunroof operation, adjust as necessary.
6. Install headliner.
7. Install sunroof opening trim lace position.