Sun Shade: Service and Repair
REMOVAL1. Place the sunroof glass panel in the vent position.
2. Remove glass panel.
Fig.1 Sunroof Assembly:
3. Remove water channel.
4. Cycle sunroof motor to the open position.
5. Move sunshade towards the closed position stopping three to four inches from the closed position.
6. Depress the spring feet clips on one side of the sun shade.
7. Remove sunshade.
INSTALLATION
1. Place one side of the sunshade spring feet clips into the top track U-frame.
2. Depress the both releasing clips on the other side to allow them to go into the top track U-frame.
3. Move sunshade to the open position.
4. Install water channel.
5. Verify that the sunshade move back and forth properly.
6. Cycle sunroof towards the closed position.
7. Install glass panel