Trunk / Liftgate Striker: Service and Repair

LATCH STRIKER

REMOVAL

1. Open liftgate.
2. Mark outline of striker on sill to aid installation.

Fig. 3:

3. Remove screws attaching striker to sill (Fig. 3).
4. Remove striker from vehicle.

INSTALLATION

1. Place striker in position on vehicle.
2. Align striker to outline mark on sill.
3. Install screws attaching striker to sill. Tighten screws to 28 N.m (21 ft.lbs.) torque.
4. Verify liftgate alignment and operation.