Headlamp Unit Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.

Fig.11 Headlamp:

2. Remove the bolts attaching headlamp to the inner fender panel.
3. Disengage the headlamp module from the panel.
4. Disengage the harness connector from the headlamp bulb.
5. Separate the bulb from the headlamp.
6. Remove the bulb sockets from the front park/ turn signal/side marker lamps
7. Separate the headlamp module from vehicle.

INSTALLATION

CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.

1. Install the bulb sockets for the front park/turn signal/side marker lamps.
2. Engage the connector to the headlamp bulb.
3. Position the headlamp in inner fender panel and seat headlamp module into place.
4. Install the bolts attaching headlamp to the panel.
5. Connect the battery negative cable.