Floor Console

FLOOR CONSOLE

REMOVAL


1. Using a small flat blade, remove forward and rearward rubber inserts.






1 - RUBBER INSERTS/CUP HOLDER
2 - BOLTS
3 - RUBBER BIN INSERTS
4 - LOCATING TAB/SLOT
5 - ELECTRICAL CONNECTOR
6 - CONSOLE
7 - BOLTS

2. Remove bolts attaching floor console to floor pan.

3. Disconnect electrical Connector.

4. Remove the console.

INSTALLATION

1. Connect electrical connector.

2. Position the locator tabs and install the console.

3. Install the seven bolts and tighten to 5 Nm (45 in. lbs.).

4. Install the rubber inserts into the console.