Air Temperature Sensor ( Ambient / Intake ): Service and Repair

REMOVAL

Fig. 23 Intake Manifold Air Temperature Sensor - 3.9/5.2/5.9L Engines - Typical:

The intake manifold air temperature sensor is located in the front/side of the intake manifold.
1. Remove air duct at throttle body.
2. Disconnect electrical connector at sensor.
3. Remove sensor from intake manifold.

INSTALLATION
The intake manifold air temperature sensor is located in the front/side of the intake manifold.
1. Install sensor to intake manifold. Tighten to 28 N.m (20 ft. lbs.) torque.
2. Install electrical connector.
3. Install air duct at throttle body.